Short answer: Concrete curbing contractors form and pour concrete edges. That ranges from decorative landscape edging around lawns and beds to curb and gutter along driveways, parking lots and private roads. A good contractor checks the layout and drainage, prepares a compacted base, pours or slip-forms the curb with air-entrained concrete, cuts joints, and cures it. In Michigan, any curb in a public right-of-way usually needs a permit and has to meet the city’s or county road agency’s standard.

Around Ypsilanti, Ann Arbor, Canton, Romulus and Sterling Heights, curbing jobs range from a homeowner wanting clean bed edges to a business owner fixing broken curb islands in a parking lot. This guide explains the curb types, the construction process, Michigan-specific concerns, and what to ask a contractor.

Types of concrete curbing

  • Landscape (decorative) edging. A low, continuous curb extruded around planting beds, trees and lawns. It can be colored or stamped. Our post on why concrete curbs beat wood and plastic borders compares the options.
  • Curb and gutter. A combined curb and drainage channel along drives, private roads and parking lots that carries water to drains.
  • Barrier and mountable curbs. Taller vertical curbs that keep vehicles out, or sloped curbs that vehicles can roll over, often used at driveway approaches and islands.
  • Parking lot islands and wheel-stop curbs. These define traffic lanes and protect landscaping and light poles. See parking lots and pole surrounds.

Our concrete curbs service page explains what GB Cement installs.

How curbing is built

  1. Layout and grades. The curb line and top-of-curb height control where water goes. Mistakes here create ponding against pavement or buildings.
  2. Utility locate. In Michigan, contact MISS DIG 811 before digging (missdig811.org).
  3. Excavation and base. Remove soft soil and compact a granular base so the curb doesn’t settle or heave.
  4. Forming or slip-forming. Landscape curbs and long straight runs are usually extruded with a curb machine. Short runs, radii and repairs are often hand-formed.
  5. Concrete. Use air-entrained concrete for freeze-thaw and salt exposure. The American Concrete Institute (concrete.org) and the Portland Cement Association (cement.org) both explain why air entrainment matters in freezing climates.
  6. Joints. Contraction joints at regular spacing, and expansion or isolation joints where the curb meets fixed structures, control cracking.
  7. Finishing and curing. Broom or smooth finish, then cure and protect from freezing.

Michigan conditions that matter for curbs

  • Plows and salt. Curbs along drives and lots in Novi, Farmington Hills, Troy and other snow-belt suburbs get hit by plow blades and soaked in brine. Air entrainment, proper finishing and a sealer help.
  • Freeze-thaw heave. Poor drainage behind a curb lets water freeze and push it out of line.
  • Public right-of-way rules. Street curbs, driveway approaches and sidewalk ramps fall under city or county road agency standards. The Michigan Department of Transportation (michigan.gov/mdot) publishes standard plans that many local agencies reference. Your city engineering office sets the requirements for local streets. Sidewalk ramps also have to meet accessibility rules. See our post on ADA guidelines for sidewalk contractors and our city sidewalk contractor page.

Repairing vs replacing curbs

Chipped or spalled faces can sometimes be patched, but patches on curbs that get plowed often don’t last. Sections that are broken through, heaved or sunk are usually saw-cut out and re-poured to match the existing profile. Read why replacement beats patching in some cases, or see concrete repair.

Questions to ask a curbing contractor

  1. Is the curb in a public right-of-way, and who pulls the permit?
  2. What curb profile and dimensions will you match or install?
  3. Machine-extruded or hand-formed, and why?
  4. Is the concrete air-entrained?
  5. How will you handle drainage and grades at the gutter line?
  6. What joint spacing will you use?
  7. How will you cure and protect it in cold weather?
  8. Can I get a written, itemized estimate?
  9. Are you insured, and can you show recent curb work?

Commercial curbing

For property managers, broken curbs at parking lot entries and islands are a trip hazard and make the property look neglected. It’s usually most efficient to schedule curb repair alongside lot or sidewalk work so lanes are closed only once. See commercial lots.

Caring for new concrete curbs

New curbs need a little care during their first season. Keep vehicles and heavy equipment off them until your contractor says they can take the load. Avoid putting de-icing chemicals directly on new concrete during its first winter, and shovel or plow carefully along the edge. Ask your contractor whether a penetrating sealer is a good idea for your curb. On landscape edging, keep mulch and soil slightly below the top of the curb so water drains past it instead of sitting against it. For lots and drives, each spring, check for chips caused by plow strikes and repair them before water gets in and freeze-thaw makes them bigger.

Working with GB Cement

GB Cement (GatlinByrd Cement) is a concrete contractor in Ypsilanti. We pour and repair curbs, sidewalks, driveways and lots in Ypsilanti, Ann Arbor, Canton, Romulus, Sterling Heights and other southeast Michigan cities. Contact us or call (734) 323-8882 to have a curb line looked at.

FAQ

What does a concrete curbing contractor do?
They form and pour concrete curbs, from decorative landscape edging to curb and gutter, barrier curbs, and parking lot islands. They also repair or replace damaged sections.

Do I need a permit for curb work in Michigan?
Curbs in a public right-of-way, such as along a street or at a driveway approach, usually need a permit from the city or county road agency. Private landscape edging usually doesn’t. Check with your local office.

Is concrete curbing better than plastic or wood edging?
Concrete is more permanent and holds its line better, especially under mowers and plows. See our comparison post for the trade-offs.

Why do curbs crack or heave?
Usually because of poor base compaction, water collecting behind the curb, missing joints, or salt and freeze-thaw damage on a non-air-entrained mix.

Can a damaged curb be repaired instead of replaced?
Small surface chips can be patched. Broken, heaved or sunken sections are usually cut out and re-poured to match.